Terms and Conditions

Wheel & Tyre Package Disclaimer

The ADR’s are very complex technical documents, without certification the obligation to ensure compliance of a modified vehicle falls to the owner and driver.

The customer acknowledges that on payment of their invoice (deposit or full payment) that they accept that the wheels and tyres on this invoice have been discussed with a sales representative and all concerns regarding fitment (if any) are clear.

The customer accepts that if they have requested a certain wheel & tyre fitment of their choosing against the sales representatives' fitment advice they are responsible for any negative outcome. The customer acknowledges that if they have raised or lowered suspension in the their vehicle we cannot guarantee the fitment of wheels and tyres without sighting the vehicle (and in some cases until wheels and tyres are fitted on the vehicle) as different suspension lift kits (or lowering kits) fitted previously can affect wheel and tyre fitment depending what height they are set at as different brands have different outcomes. Further modifications may need to be undertaken to make the wheels and tyre suitable for the modified vehicle. The same applies for (but is not limited to) flares, wheels outside the recommended OEM offset scope, larger than OEM tyre sizes, bullbars & mudflaps fitted on vehicles which can affect wheel and tyre fitment.

If your vehicle is highly customized and/or has raised or lowered suspension, we cannot guarantee fitment unless stated otherwise. Additional charges may be incurred at the point of installation for safe/ proper fitment and alignment if the incorrect information has been provided by the customer

The customer is solely responsible for the accuracy, completeness and suitability of information you provide for an order, and (subject to any rights you may have under the Australian Consumer Law in Schedule 2 of the Competition and Consumer Act 2010 (Cth) ["ACL"]) you will not be entitled to a refund if the goods or services are not suitable because you provided incorrect information. eg; If you have not informed us of additional accessories fitted to your vehicle such as a bullbar, winch, incorrectly measured or assumed constant weight in rear/front or future modifications which add additional weight to the vehicle and require heavier rated suspension, unrolled guards or excessively lowered vehicles.

We will always endeavor to provide the correct advice to the guidelines as per our professional opinion during the course of your Wheel & Tyre package discussion.

Tyre Disclaimer

The ADR’s are very complex technical documents, without certification the obligation to ensure compliance of a modified vehicle falls to the owner and driver.

The customer acknowledges that on payment of an invoice (deposit or full payment) they accept that the tyres on this invoice have been discussed with a sales representative and all concerns regarding fitment (if any) are clear.

The customer acknowledges that on payment of this invoice (deposit or full payment) they accept they have checked and verified the invoice for all products discussed with their sales representative have been included on the invoice as to their requirements including (but not limited to) tyre size, tyre pattern and tyre brand. Any changes after payment or part payment may incur additional charges. If there are any products discussed which have not been included or further information/clarification is required please contact your sales representative before paying any part of an invoice.

The customer accepts that if they have requested a certain Tyre size/ fitment of their choosing against the sales representatives' fitment advice they are responsible for any negative outcome. The customer acknowledges that if they have raised or lowered suspension in the their vehicle we cannot guarantee the fitment of wheels and tyres without sighting the vehicle (and in some cases until wheels and tyres are fitted on the vehicle) as different suspension lift kits (or lowering kits) fitted previously can affect tyre fitment depending what height they are set at as different brands have different outcomes. Further modifications may need to be undertaken to make the tyres suitable for the modified vehicle. The same applies for (but is not limited to) flares, bullbars, guards, fender flares, aggressive offset wheels, & mudflaps fitted on vehicles which can affect wheel and tyre fitment.

If your vehicle is highly customized and/or has raised or lowered suspension, we cannot guarantee fitment unless stated otherwise, and additional fees may be required to be paid at the point of installation for safe and proper fit and alignment if the incorrect information has been provided.

We will always endeavor to provide the correct advice to the guidelines as per our professional opinion during the course of your tyre purchase discussion.

Suspension Lift Kit Disclaimer

The ADR’s are very complex technical documents, without certification the obligation to ensure compliance of a modified vehicle falls to the owner and driver.

If there are any products discussed which have not been included or further information/clarification is required please contact your sales representative before paying any part of an invoice. The same applies (but is not limited to) suspension options, changes in brands or adding additional components after the invoice has a payment made against it. Any changes of these after payment of invoice may incur an additional charge.

The customer acknowledges that modifying the vehicle's suspension will result (in some cases) in a different ride comfort from factory and if the chosen suspension is designed to maximize off-road performance or performance in general there may be a change in on road characteristics.

The customer accepts that if they have requested a certain Suspension kit of their choosing against the sales representatives' fitment advice they are responsible for any negative outcome.

Warranty may not apply on Lift Kits above 50mm for some brands of suspension. Please check with your sales consultant to confirm if the brand you have chosen will be warranted by the manufacturer if above 50mm.

The customer is solely responsible for the accuracy, completeness and suitability of information you provide for an order, and (subject to any rights you may have under the Australian Consumer Law in Schedule 2 of the Competition and Consumer Act 2010 (Cth) ["ACL"]) you will not be entitled to a refund if the goods or services are not suitable because you provided incorrect information (eg; If you have not informed us of additional accessories fitted to your vehicle such as a bullbar, winch, incorrectly measured or assumed constant weight in rear/front or future modifications which add additional weight to the vehicle and require heavier rated suspension).

We will always endeavor to provide the correct advice to the guidelines as per our professional opinion during the course of your suspension solution discussion.

Build Disclaimer

The ADR’s are very complex technical documents, without certification the obligation to ensure compliance of a modified vehicle falls to the owner and driver.

If there are any products discussed which have not been included or further information/clarification is required please contact your sales representative before paying any part of an invoice. The same applies (but is not limited to) changes in wheel colors, wheel styles, wheel sizes, suspension options, accessory options, tyre brands and tyre patterns. Any changes of these after payment of invoice may incur an additional charge. Any small details of the build that are a specific request by the customer must be noted on the invoice at the time and the customer takes full responsibility. If there are parts of the specifics which a customer has not specified (such as a mounting point for a compressor outlet) we will install the products as to our professional opinion of where they should be to ensure they function correctly as intended.

The customer accepts that if they have requested a certain Suspension kit or any part of their build choosing against the sales representatives' advice they are responsible for any negative outcome.

The customer is solely responsible for the accuracy, completeness and suitability of information you provide for an order, and (subject to any rights you may have under the Australian Consumer Law in Schedule 2 of the Competition and Consumer Act 2010 (Cth) ["ACL"]) you will not be entitled to a refund if the goods or services are not suitable because you provided incorrect information (eg; If you have not informed us of additional accessories fitted to your vehicle such as a bullbar, winch, incorrectly measured or assumed constant weight in rear/front or future modifications which add additional weight to the vehicle and require heavier rated suspension).